inari@piefed.zip to Linux@lemmy.mlEnglish · 1 month agoClaude Code / AI Shows Potential For Reverse-Engineering Hardware For Linux Supportwww.phoronix.comexternal-linkmessage-square34linkfedilinkarrow-up1144arrow-down121 cross-posted to: [email protected]
arrow-up1123arrow-down1external-linkClaude Code / AI Shows Potential For Reverse-Engineering Hardware For Linux Supportwww.phoronix.cominari@piefed.zip to Linux@lemmy.mlEnglish · 1 month agomessage-square34linkfedilink cross-posted to: [email protected]
minus-squaremfat@lemmy.mllinkfedilinkarrow-up20arrow-down2·1 month agoI made the fingerprint sensor on my Lenovo 14s Yoga work thanks to Claude. It took 30 minutes.
minus-squareutopiah@lemmy.mllinkfedilinkarrow-up7·1 month agoPlease make it available for others to use and not have to spend resources to do it again, ideally upstream it.
minus-squaremfat@lemmy.mllinkfedilinkarrow-up3·1 month agoI did start a public a GitHub repo right after I made it work.
minus-squareutopiah@lemmy.mllinkfedilinkarrow-up2·1 month agoThat’s great, could you please share a link to that repository so that anybody interested could benefit from your work?
minus-squareAliOski@feddit.nllinkfedilinkarrow-up4·1 month agoI have been wanting my fingerprint device working too. Did it require a Claude subscription or would the free plan suffice?
minus-squareGiorgioBoymoder@lemmy.mllinkfedilinkarrow-up3·1 month agoidk about claude but the free version of Kimi is capable of helping you here. I use it for my linux tech support and it’s very helpful.
minus-squareAliOski@feddit.nllinkfedilinkarrow-up1·1 month agoWell I know the capabilities of the AIs on the tech support side of things, however, free plans have use limits, and often those limits are reached very quickly once you are trying to build such a ‘big’ project.
minus-squareGiorgioBoymoder@lemmy.mllinkfedilinkarrow-up1·1 month agoLook all I’m saying is you could very likely use it to get your fingerprint device working.
minus-squareGiorgioBoymoder@lemmy.mllinkfedilinkarrow-up2·1 month agoNo, but for my basic personal use the free version is pretty good.
I made the fingerprint sensor on my Lenovo 14s Yoga work thanks to Claude. It took 30 minutes.
Please make it available for others to use and not have to spend resources to do it again, ideally upstream it.
I did start a public a GitHub repo right after I made it work.
That’s great, could you please share a link to that repository so that anybody interested could benefit from your work?
https://github.com/mfat/goodix-55a2-linux
I have been wanting my fingerprint device working too. Did it require a Claude subscription or would the free plan suffice?
idk about claude but the free version of Kimi is capable of helping you here. I use it for my linux tech support and it’s very helpful.
Well I know the capabilities of the AIs on the tech support side of things, however, free plans have use limits, and often those limits are reached very quickly once you are trying to build such a ‘big’ project.
Look all I’m saying is you could very likely use it to get your fingerprint device working.
Does Kimi k3 really have a free version?
No, but for my basic personal use the free version is pretty good.
I have the pro subscription ($20 a month)
Makes sense, thank you