• Avid Amoeba@lemmy.ca
    link
    fedilink
    arrow-up
    25
    ·
    4 days ago

    This is important for those replacing gas or propane stoves and don’t want to add the cost of running a 240V line that most resistance and induction ovens require.

    OK this makes sense. It answers my WTF reaction at the thought of a battery-backed range.

      • rollerbang@lemmy.world
        link
        fedilink
        arrow-up
        6
        ·
        edit-2
        4 days ago

        For real? In Europe one can get induction for less than €200. Significantly less. And a “real”, full size one, 4 spots. And adding an oven adds additional €200.

      • UltraMagnus0001@lemmy.world
        link
        fedilink
        arrow-up
        2
        arrow-down
        4
        ·
        edit-2
        4 days ago

        I also see those batteries going bad and complications in the future with such a complicated system rather than a dedicated 240v circuit.

        • Nollij@sopuli.xyz
          link
          fedilink
          English
          arrow-up
          7
          arrow-down
          2
          ·
          4 days ago

          What makes it seem convoluted? It’s slightly more complex than a standard electric stove, but we have and use countless devices on a daily basis with this technology. Very rarely do they have any issues with the charging/discharge circuit.

          Yes, the batteries will eventually need to be replaced, and it could be an issue during Thanksgiving (etc) when a ton of power is needed all at once. But I really think you’re overestimating the usage it will get.

          In any event, this is why they’re running it as a pilot. Any real-world issues will come to light before a larger rollout.

      • Trashcan@lemmy.world
        link
        fedilink
        arrow-up
        5
        ·
        4 days ago

        I think this is the new section?

        The winning submission came from Copper, a California-based company which designed a battery-equipped induction stove that plugs into a standard 120-volt outlet. That means the units can be used in existing NYCHA kitchens without the need for major electrical upgrades.

        • trolololol@lemmy.world
          link
          fedilink
          arrow-up
          1
          ·
          1 day ago

          Still sounds easier than fixing old gas plumbing, and again, the current is lower so the wires are not thicker they’re thinner.

          And I’m certainly not keen on running a big battery that will be next to heat and needs replacement approved by landlord every 3-5 years, plus having to own expensive pans.

          What do I know, I never owned electric stove and I don’t want one.